All frames made with headstock attached in position.
Adventurer 24 Trailer Sailer
This is a great series of shots of the building of an
Adventurer 24 in wood epoxy.
These photographs are presented with the kind permission of
Andrew, the
owner builder who has done such a fine job.
|
Page 1 ...... |
Setting up the frames |
| Page 2 ...... | Planking and Turnover |
| Page 3 ...... | Deck and Cabin |
| Page 4 ...... |
Page 1: Setting up the frames
All frames made with headstock attached in position.
The first frame standing on the strongback.
The stem placed after laminating to the shape of the full size pattern suppled
All frames stood.
Stringers set into the frames.
The first layer of the two layers required being wrapped onto the hull.