Waverunner 24

Below is a pictorial stage by stage example of a Waverunner 24 being build by Mike Moore of Sydney, Australia. These are photos of a completely detailed scale model (approximately 1 meter long) that Mike is building prior to the construction of the complete boat. After seeking advice from our office Mike has extended the hull by three feet (to twenty seven feet overall) to give him that bit of extra room on the aft deck. 

 


Stage1 : The Strongback
Stage 2 :The Frames

Stage 3 : Setting up the frames onto the strongback.



Stage 4 : Securing the stringers to the frames

 

Stage 5 : entire bottom hull framing complete

 

Stage 6: First layer. Bottom skin


Stage 7: First skin layer. Sides

Stage 8: Second skin layer beginning to be applied.

Stage 9: Second skin completed and fairing finished. Hull rolled over

Stage 10: Bulkheads fitted


Mike, an experienced model maker would be happy to quote on making a model of your boat. This model is one meter long, which, as mentioned above, Mike made so he could work through any problems he might find before making the full size boat. If you are interested in having a model of your own boat made for the den, the office, the entry hall, or where ever then contact Mike at mikechanmoore@bigpond.com.au

 

 

 

 

 

 

 

 

 

 

 

Home